Repair your cellular blinds and restring them yourself

Repair your cellular blinds and restring them Yourself | Robertaschira

How to Repair Blinds Strings Quickly

The blinds strings may be damaged and not functioning properly. We’ll show you how to change the tilt cords and lengthen your life chords.

Can You Fix Your Blinds by Yourself?

Before you begin to disassemble your blinds, and decide if it’s worth it to fix them yourself. Check the warranty of your blinds and make sure that they are still in the warranty.

If they do, contact the manufacturer of the Repair your cellular blinds and restring them yourself to inquire if they will be replaced or repaired.

Even if you have lost your warranty on the blinds, it is still worth calling the manufacturer or retailer and asking if they can sell replacement parts. For blinds to work properly, they must have the correct repair cord or string. You can contact the original manufacturer, retailer, or both, to find out if they sell it.

If you are looking for replacement parts or if your blinds are old, you can shop at specialty online retailers or hardware stores. It is important to buy blind cord/or string and not any other twine.

Blind cords are specially made to resist breaking or catching. Regular strings could break and you will have to replace the blinds in your living-room window.

While it’s usually quite easy to fix blind cords, there are a few cases where it might be easier to replace the blinds.

If the string is extremely snarled or difficult to remove, as well as other problems like broken slats and damaged string, you might consider ordering replacement shades at Factory Direct Blinds. They can be installed by yourself with the help of our many guides.

 

What’s wrong with your Blind Strings?

Before you place an order for replacement parts, perform a quick assessment of your Repair your cellular blinds and restring them yourself. If your blinds are not cordless, you will first need to inspect the pull cord. The pull cable could be frayed, damaged, or snarled.

Even if all parts of your blinds function perfectly, the pull cable can cause blinds not to raise or lower even if they are in perfect condition.

Next, you need to inspect the strings that run along the blind’s slats. Strings are typically associated with wooden blinds. But they can also appear in pleated blinds, cell shades, and other window treatments.

These strings are what enable the blinds to be raised and lowered. However, if the strings become frayed or snarled the blinds will cease to function.

Sometimes, the problem might include both a damaged pull cord or broken blind strings. Once you have found the source of your problem, you can follow these steps to fix it.

 

How to Fix a Broken Pull Cord ?

The new pull cord will be needed, along with a lighter and some masking tape. To make a neat finish, remove the wooden cap bead at the end of your cord. Trim any snarls.

Next, consider whether you want to lengthen the existing pull cable or replace it entirely. If the latter, skip to the next section. Most wood blinds and miniblinds come with two sets of cords. One is to tilt the blinds, and the other is to raise or lower them.

 

This method will allow you to lengthen your strings.

Place the end you are using for the new cord next to the end of your old cord. To hold the ends together, wrap masking tape around each end. Or you can use a lighter or match to melt them together.

Start by lighting the ends and then blowing out the flame. The cord should be mended while it is still hot. Wear sturdy work gloves if you need them.

 

You can trim the pull cord to the length that you desire, attach the wooden cap bead to it, and tie a knot to secure it. You can also melt the string with a lighter to prevent it fraying. You can test the pull cord again to ensure it doesn’t break.

 

Replacing a Broken Tilt Cord

First, remove the existing string from the tilt side of your Repair your cellular blinds and restring them yourself to replace it. To remove pull cords that raise and lower blinds, you will need to skip the next section. These are the same cords that make the blinds strings and run through slats.

To replace the entire cord tilt strings, take out the brackets that hold the blinds. Lay them flat on the ground. You can then remove the old pull cable from the cord tilt system.

Repair your cellular blinds and restring them yourself

To replace the cord, take the new pull-cord and tie a knot. Finally, insert the cord through the hole at the spool. Wrap one string around your spool one way and wrap the other around the spool the opposite way. Place the strings into the holes at the bottom cord tilt mechanism’s guide.

Pull on the one string first, then the opposite. To hold the pull cord in place, cut the new length of the pull cord. For fraying prevention, heat the end of the string once more with the lighter. Make sure to test the pull cord again for proper functioning after you have replaced the brackets at the blind’s top.

 

How to Avoid Future Damage to Your Pull and Tilt Cords

There are several accessories that can be used to keep blinds cords out of reach of pets and children. You can use a blind cord winder or a screwdriver to attach the blinds’ cords to the wall. You can also trim the cord yourself to reattach the wooden cap beads at the base.

 

The best way to avoid any further damage to your pull cords is to get rid of them all. Pull cords not only get snarled easily but also pose choking and strangulation risks to children and pets.

Cordless shades are the best option for upgrading your blinds. You can raise and lower the bottom bar by using your hand. Cordless blinds are a great way to get rid of those annoying cords.

 

Our guide provides guidance on how to fix cordless blinds.

 

Blind Strings Can Be Fixed

Blind strings are the same as pull cords: The lift strings run up the headrail, becoming the pull string. The pull cord causes Repair your cellular blinds and restring them yourself to raise and lower as you tug on it. Before you get started, check your blinds to confirm that the lift strings are correct.

Wood blinds with wooden slats come in two types of cords. Two are ladder-like support cords the slats rest onto and two straight lift strings that run directly through the slats. For pleated shades, and other window treatments, the ladder strings are not necessary.

 

Learn how the original light string went through the slats. Then take photos. We guarantee you will be grateful you did.

Before you begin, make sure your blinds have been fully extended. You will be able to feed the cord through the slats. It might be a good idea to remove the blinds from their headrail and set them on the ground. This will allow you to not fight gravity.

Now it is time to get started. A small plastic cap should cover the hole in the bottom slat. Grab a screwdriver to pop the cap off and remove the blind string.

Start by removing your old blind string. Pass it back through the wood slats, and then unweave it with the ladder strings. You may need to trim the blind cord if it is frayed or knotted.

 

You can replace the old blind cord once the original defective cord has been removed. If you have wood blinds that are fitted with slats and thread the cord through the holes, weave it under the ladder strings.

Continue this process until your blind string is threaded through each hole. Make sure the string is not slipping through the hole by attaching a retaining tie at the end. You can replace the cap that you took earlier, and give your new blind string a tug.

Repair your cellular blinds and restring them yourself

Next, thread the remainder of the blind string through a headrail. This will allow it to become the pull cord. As you complete this step, make sure not to pull the blind string from the blinds. It is not your intention to undo all the work done.

To make a pull string, thread the lift cord through the drums on the head and through the cord lock mechanism. Then pull the pull string through the hole in the bottom of the rail. Match the ends of the two pull cords to form a pull cord. Trim them to the required length.

Tie a strong knot to secure the wooden cap beads. In order to prevent the string from fraying, heat the end of it once more with a lighter. Check that the pull cord works correctly.

 

How to Prevent future Damage to Your Blind Strings

A few precautionary steps can help you keep your blinds in tip-top shape and save you the expense of replacing the cord. Take care when lifting and lowering blinds. Make sure that the strings don’t become lopsided.

Children and pets with small hands may tug at the blinds. If this is the case, raise the blinds or move furniture so that they don’t get in the way.

It might be worth looking at different shades when replacing your blinds.

Repair your cellular blinds and restring them yourself  and wooden blinds are classic designs that look timeless. However, slats make the strings more visible and can be tangled. For your home, you might choose a shade that covers the strings like a pleated shade and cellular shade.

Quick Fix: How to Fix Blinds String

The blinds may not be working properly if they have broken strings. This guide shows you how to change the tilt cords as well as the lift cords for your window shades.

Can You Fix Your Blinds by Yourself?

Before you begin to remove your blinds, and commit to fixing them yourself completely, you must first decide if it’s worth it.

To begin, make sure you double-check your blinds’ warranty. If they do not, you can ask the manufacturer of the blinds or the retailer that sold them for a replacement or a fix.

 

Even if you have lost your warranty on the blinds, it is still worth calling the manufacturer or retailer and asking if they can sell replacement parts. For blinds to work properly, they must have the correct repair cord or string. You can contact the original manufacturer, retailer, or both, to find out if they sell it.

If you are looking for replacement parts or if your blinds are old, you can shop at specialty online retailers or hardware stores. It is important to buy blind cord/or string and not any other twine.

Blind cords are specifically woven to be strong, smooth, and less likely to catch as you raise or lower the blinds. Ordinary strings could break and you will have to repair your living-room window blinds again.

 

Although it’s usually quite simple to fix blind cords, there are a few cases where it may prove more beneficial to have the Repair your cellular blinds and restring them yourself replaced.

If the string is extremely snarled or difficult to remove, as well as other problems like broken slats, you might consider ordering replacement shades from Factory Direct Blinds. They can be installed by yourself with the help of our many guides.

 

What’s the Deal with Your Blind Strings

Before ordering replacement parts for your blinds, you will need to quickly diagnose the condition of your blinds. If your blinds are not cordless, you will first need to inspect the pull cord.

The pull cord might have snapped off, become snarled and jammed, or be otherwise damaged. Even if your blinds are in good working order, the pull-cord may cause blinds to not raise or lower even though they are still functional.

Next, you need to inspect the strings that run along the blinds’ slats. Strings are typically associated with wooden blinds. But they can also appear in pleated blinds, cell shades, and other window treatments.

These strings allow blinds to be raised and lowered. However, if the strings become frayed or snarled the blinds will cease to function.

In some cases you might need to replace both the pull cord and the blind strings. Once you’ve identified the problem, and have the necessary replacement parts, you can follow the instructions below to fix the blinds.

 

Repairing a Broken Pull Cord

The new pull cord will be needed, along with a lighter and some masking tape. To make a neat end, remove the wooden cap bead and trim off any snarls.

Next, consider whether you are trying lengthening the existing pull cord, or replacing the entire thing. Two sets of cords are often used for mini and wood blinds. One set is used to tilt and the other to raise or lower the blinds. To lengthen either set of cords, you can use the following method.

Place the end you are using for the new cord next to the old. To hold the ends together, wrap masking tape around each end. Or you can use a lighter or match to melt them together.

Start by lighting the ends and then blowing out the flame. The cord should be mashed together as it is still hot. Wear sturdy work gloves if you need them.

You can trim the new pull cord to the length that you desire, attach the wooden cap bead to it, and tie a strong knot to secure it. You can also melt the string’s end with a lighter to prevent it from fraying. You can test the pull cord again to ensure it doesn’t break.

 

Replacing a Broken Tilt Cord

If you have to replace the entire string on either side of the blinds’ tilt sides, first remove the one that is broken. Skip to the next section for the removal of pull cords, which raise and lower blinds.

The blinds’ cords are made from the same cords that run through the slats and form the blinds strings.

To replace the entire cord tilt strings, take out the blinds from the brackets. Lay them on top of the ground. The old pull cable can be gently removed from the cord tilt system.

To replace the cord take the new pull cable and tie a knot. Finally, insert the cord through the hole at the spool. Wrap one string around your spool one way and wrap the other around the spool the opposite way. Insert the strings into the holes at the bottom cord tilt mechanism’s guide.

Pull on one of the strings first, then the other to test the tilt mechanism. Trim the new pull string to the length you prefer, then thread the wooden caps beads on the other end. Finally, tie a knot to secure it. For fraying prevention, heat the end of the string with the lighter. Make sure to test the pull cord again for proper functioning after you have replaced the brackets at the blind’s top.

 

How to Avoid Future Damage to your Pull or Tilt Cords

You can purchase a variety of accessories to keep your blinds’ cords away from pets and children. You can attach a black plastic blind cleat to a wall, wrap the excess cord around it, or use a cord winder to reduce the length. You can also trim the cord yourself to reattach the wooden cap.

 

The best way to avoid any further damage to your pull cords is to get rid of them all. Pull cords are not only annoying and can cause snarling, but they also pose dangers for children and pets. Cordless shades can be a good option for upgrading blinds. You simply raise and lower the bottom bar by using your hand. Cordless blinds are a great way to get rid of those annoying cords.

 

Our guide provides guidance on how to fix cordless blinds.

 

Fixing Blind Strings

Blind strings and draw cords are the exact same string. The pull cords run from the headrail up to the lift strings. The pull cord causes blinds to raise and lower as you tug on it. Before you get started, check your blinds to confirm that the lift strings are correct.

Wood blinds with wooden slats come in two types of cords. Two are ladder-like support cords the slats rest onto and two are straight lift cords which run directly through the holes. For pleated shades, and other window treatments, the ladder strings are not necessary.

 

It is worth taking pictures to see how the original light strings passed through the slats. Before you start, ensure that your blinds are fully extended. You will be feeding the new cord through the sliding slats.

It is possible to take out the blinds from your headrail and put them on the ground. That way, gravity won’t be fighting you all the time.

Now, you’re ready to go. A small plastic cap should cover the hole in the bottom slat. The cap should be removed with a screwdriver. Once the cap is removed, identify the blind string. Move the blind string back through the slats, and then unweave from the ladder strings. You may need to trim the blind cord if it is frayed or knotted.

You can replace the old blind cord once the original defective cord has been removed. Then thread the cord through the blinds. You can weave it under ladder strings for wooden blinds.

Continue this process until the blind string has passed through each hole. Make sure the string is not slipping through the hole by attaching a retaining tie at the end. You can replace the cap that you took earlier, and give your new blind string a tug.

Next, you will need to thread the remainder of the blind string into the headrail. This will allow it to become the pull cord. As you complete this step, make sure not to pull the blind string from the blinds. You don’t want all your hard work to be undone.

 

To make a pull string, thread the lift cord through the drums on the head and through the cord lock mechanism. Then pull the pull string through the hole in the bottom of the rail. Match the ends of the two pull cords to form a pull cord. Trim them to the length you prefer.

Tie a strong knot to secure the wooden cap beads. In order to prevent the string from fraying, heat the end of it once more with a lighter. Check that the pull cord works correctly.

 

How to Prevent Future Damage to Your Blind strings

Certain precautions will help to keep your blinds in tip-top shape and save you the expense of replacing the cord. Take care when lifting and lowering blinds. Make sure that the strings don’t become lopsided.

Children and pets with small hands may tug at the blinds. If this is the case, raise the blinds or move furniture so that they don’t get in the way.

It might be worth looking at different shades when replacing your blinds. The traditional look of wooden blinds or mini blinds is timeless. However, the slats make the strings more visible and are more likely to become tangled.

A shade design that hides the strings (such as a pleated shade and cellular shade) may be a better fit for your home.

You can get rid of strings entirely with roller shades and Roman shades. These fabric shades come in cordless options for a stylish, child-proof treatment that provides privacy and light control.

 

Factory Direct Blinds sells a variety of window treatments at affordable prices if you have decided that replacing your blinds is the best option. We can provide blinds in non-standard sizes or on a tight budget. Our commercial blinds program offers the lowest prices for large buildings with many windows.

Leave a Comment

Your email address will not be published. Required fields are marked *